SUPLA

supla

+

SUPLA-CLOUD

+

ESP8266

Raspberry Pi

Arduino

(IoT) Internet of Things is now coming!

Building automation systems available on the market are usually very complex, closed and expensive. In many cases they must be installed on the very early stages of house construction. SUPLA is simple, open and free of charge. It gives an opportunity to build elements based on RaspberryPI, Arduino or ESP8266 platforms and then join them either through LAN or WiFi. Through SUPLA you can, among others, control the lighting, switch on and off household appliances and media, open and shut gates and doors, or control room temperature. All the above can be done with just touch of a finger. SUPLA is available from any place on Earth if you just have a smartphone or tables available as well as Internet access. SUPLA is developed based on an Open Software and Open Hardware . This way, you can also develop this project!

Doors — Doors
Open or check, if the door is open.

Roller Shutters — Roller Shutters
Open and shut roller shutters with a swipe of your finger. When out, you can see at any given time, if they are open or shut.

Lighting — Lighting
Turn the lights on and off.

Garage Door — Garage Door
Check if the garage door is open from any place around the world.

Gateway — Gateway
Open or check, if the gateway is open.

Home Appliances — Home Appliances
Turn the appliances on and off through WiFi socket.

Temperature — Temperature
Monitor temperature.

Gate — Gate
Use your smartphone as a handheld controller to your gate.

Liquid Sensor — Liquid Sensor
Check liquid level in different containers.

Many more in the future... SUPLA is an open and constantly developing project. Over time it will be enlarged to include more functions. If you want to expand the project with us – feel free to join us!

Altogether at your fingertips. Anywhere at any time.

All of us have at least once been wondering whether they turned the light, oven, or boiling pot off when they left home. Today, you do not have to worry about that. The only thing to do is to start SUPLA on your smartphone and immediately you will have a chance to see whether all of those are actually off. If they are not, you can simply with a touch of your finger turn the lighting/house appliances off , shut the window rollers or close the gate. Download the application on your smartphone and start the adventure wit SUPLA today. The software and all the other elements of the project are free of charge and open.

Kitchen
OFF

Lighting
Temperature
SHUT
Roller Shutter
Porch
OPEN
Door
OPEN
Roller Shutter
ON
Socket
Garage
CLOSE
Garage Door
ON

Lighting
Bedroom
OFF

Lighting
OFF
Socket
Garden
OPEN
Gate
OPEN
Gateway
Rainwater

SUPLA-CLOUD

SUPLA-CLOUD is a central point joining the executive devices for indirect and direct operation of your household or office appliances and other elements with client applications which you can install on your tablets and smartphones. This software allows to operate, from one spot, the whole system infrastructure using any modern Internet browser. Server access is free of charge. You can also set up your own independent server working within the Internet or home network using system sources which you can download from GITHUB.

Create an account Get form GITHUB

News and infos

16 January 2023
Today we celebrate the seventh birthday of SUPLA.ORG. Traditionally, on this occasion, we have organised a competition for you in which you can win devices and T-shirts with our logo. Details of the competition can be found on our FB profile and on forum.supla.org. We encourage you to take part in the competition . Thank you for being with us and that are more and more of you. :)
3 November 2022
Cloud v22.11 has been released. The new version introduces: Automated gate closing after a specified opening time. Voltage aberration recording in electricity meters Support for 3-way switches in webhooks (Forwarding events e.g. to scripts.supla.io)Scene integration with Amazon Alexa. Scene integration with Google Home (pending verification by Google). Ability to change the door opening sensor verification method from passive to active. Scene in scene - added the option "Wait for the scene to finish before continuing the action". Full support for devices that can work in sleep mode.
30 July 2022
We are very excited to announce that the CLOUD 22.07 version has been released. The most significant new feature of this release is the so-called Scenes. They allow you to schedule a series of consecutive events to be executed at specific intervals. Currently, Scenes can be run from the web, direct links, schedules, APIs, and other scenes. Soon, it will also be possible to access, start, and stop them via Android and iOS apps. We encourage you to read about the release in more detail on the forum and in the official release changelog.
29 July 2022
We are pleased to inform you that the number of households in which Supla appeared has exceeded 150 thousand today. We would like to thank all of the users and the entire community for being with us and helping us in the development of the project. Thanks to you, Supla has become one of the most popular SmartHome solutions in Poland. Thank you once again!
19 May 2022
Today, we are launching a completely new, free of charge service for you, that will let you control your Supla devices from a phone without having to install our application. What’s more, the telephone can be analogue, without Internet access. The only requirement is an active CLIP (Calling Line Identification Presentation) function, i.e. the presentation of the phone number of the caller. The principle of operation is simple. All it takes, is to call a specific number, and Supla will perform the action assigned to the caller’s number. It can, for example, open a gate or close all the roller shutters. The service was developed primarily with housing estates in mind where, with a particularly high number of users, it is easier to manage telephone numbers rather than installations of apps for opening the estate gate. The service can also be successfully integrated with an alarm central station, that can call a specified number in the event of an alarm. We believe that thanks to your creativity, the provided solution will find a broad range of applications. We encourage everyone willing to try out the new functionality to visit https://call.supla.io
7 February 2022
From January 2022 Comelit Group Spa joins the Supla project, expanding its home automation offer with the new WiFree modules integrated into the platform. The WiFree solution transforms your home into a smart home with a simple touch: from controlling the shutters, to adjusting the lights, from group controls to measuring consumption. The new integration between Comelit and Supla contributes to making the home more efficient, comfortable and beware of waste.
16 January 2022
Today we are celebrating the sixth birthday of SUPLA.ORG. On this occasion we prepared a contest in which you can win 60 modules from the Supla-Zamel series. We invite you to take part in the contest. Good luck! Thank you for being with us :)
25 June 2021
Do you lack a wall-mounted button for central control of all your roller-blinds ? You don't have a dedicated wiring ? Now it's not a problem anymore. Along with the release of the cloud in v2.3.35 version, we introduce the Action Trigger. It's a new functionality enabling the control of selected devices or a whole group of devices using other devices. It means that after an appropriate update of the system software of your roller-blind controller, apart from controlling the roller-blind to which it is connected, it will be able to control the other roller-blinds at your house as well. Controlling the roller-blinds using the Action Trigger is only one of the examples for which it can be used.
22 June 2021
We are pleased to announce that Supla is currently ranked 6th among the best apps in the Home category in the Google Play Store and 58th in the Lifestyle category in the App Store. Thank you!
20 February 2021
The server software has been updated to 2.3.26 version. Along with the update, our users have gained an long-awaited feature allowing for the integration of entrance and garage gates with Google Home. The new version also includes a native integration with MQTT broker, support for AI-Speaker assistant and support for Home Assistant MQTT Discovery.
16 January 2021
Dear Supla users, today marks 5 years since the SUPLA project was started. During this time, we've managed to appear in over 86 thousand homes. Over 140k people have installed our Android app, and nearly twice as many did the same with the iOS version. Thank you so much for being with us all this time and for cheering for us every day. As Supla grows, your expectations naturally also grow in terms of how the project should be developing, in which directions, and which new functionalities it should gain. Therefore, we'd like to ensure you that we make every effort that our team grows along with the development of the project as well, so as to be able to complete the tasks which are set for us. We're optimistic about the future and we hope that the functionalities you're waiting for will be available in the near future. As usual we have some equipment for you. This time, it'll be 5xArduino Mega, 5xNodeMCU, 5xMEW-01, 5xSBW-02, 5xSRW-01. Every fifth person that sends an e-mail at prezentyna5teurodziny@supla.org until 21/01/2021 (or until the pool lasts) will receive this equipment. Please let us know in the subject of your e-mail which of the devices you'd like to get. Once again, thank you so much for these 5 wonderful years.
19 October 2020
We invite you to join the competition organised by one of our partners - Zamel. You can win a PLN 10,000 voucher for the purchase of equipment and its installation in your house. For more details, please visit https://konkurs-supla.zamel.com/
19 October 2020
A Polish company STA System is concluding its work on a driver for germicidal lamps, which apart from basic controlling functions, will be facilitating the management of lamps by determining the life of radiators and monitoring their wear. Thus STA System is joining the group of partners who joined our project.
5 October 2020
The development of our new project brings us much joy, but it also requires commitment and hundreds of hours invested every month. Our users are our biggest motivation for further development, and their numbers keep growing. We are very happy that the number users of our app on Android exceeded 100 000. This is a 100% increase within the last year, and we would like to thank everyone for this achievement!
6 July 2020
Digi Glass Factory is a manufacturer of a unique product, which is intelligent glass. Intelligent glass can be transparent like traditional glass or completely matt – according to your needs. The product can be a window and shutter at the same time. DFG, in order to address the expectations of customers, has decided to upgrade the capabilities of its product with the control of glass transparency by Supla application. For this purpose, a unique driver that allows for controlling individual segments of the glass, and a dedicated visualisation in Supla app have been created.
16 June 2020
Wekta - the company that produces the highest quality devices that improve the quality of life, such as uniphones, video uniphones, multi-functional video intercoms, as well as innovative access control systems - is joining the project. The broad offer of the company is going to be expanded with the addition of a module designed for the TK10 uniphone, allowing for its connection to our infrastructure. Therefore, TK10 users will have the possibility to open doors with a smartphone and to call for help using an application (S.O.S button) whenever there is a need.
29 May 2020
A Czech manufacturer of a wide variety of valves - Peveko, joins the project by introducing a valve integrated into our infrastructure, so that you can control it using our application. The company exists since 1991 and has produced over 10 million valves to this day. The latest valve has a radio flooding sensor and a battery that maintains power, which allows the valve to be closed in an emergency. In addition, the valve can be controlled using a radio remote control. We encourage you to visit Peveko website. www.chytryventil.cz
16 January 2020
On the occasion of the fourth birthday of the Supla project, we prepared several dozen devices in the form of modules working under the control of our software. These are energy monitors, gate modules, shutters controllers, led rgb controllers and power supply switches. We would like to invite you to take part in the competition in which you could win this equipment. The rules of the competition will be published on our forum and Facebook profile. Have fun with us!
13 January 2020
Supla was launched on 16 January 2016 and after only nine months it was present in 1500 houses. Such popularity of the project gave us an enormous amount of energy for its further development. Subsequent months proved that the popularity trend of the project not only continued, but also increased substantially to reach more than 50,000 homes connected to Supla today. We would like to express our thanks to all users for their tremendous trust in us. Thank you for being with us!
10 December 2019
Client software that connects Supli to the MQTT broker has been available on our forum for several days now. The current version is in the experimental phase. We invite everyone interested to test. More on forum.supla.org.
1 October 2019
The British manufacturer of high-quality light dimmers, switches and decorative sockets, Doyle & Tratt Products Ltd, is joining the project! The company, known under the brand name VARILIGHT, has resolved to launch a series of devices integrated with the infrastructure of our project. The VARILIGHT are experts in LED dimming technology and their light dimmers are regarded as one of the best in the world. Their characteristic feature is the fact they can be connected to the installation without using a neutral power cable (N). Thanks to VARILIGHT, the users of SUPLA.ORG will be able to access advanced technology, which has not been available to us so far.
25 September 2019
We are keen to inform you that today, i.e. 25.09.2019, Wojciech Frącz, who is one of the key members of our team, has defended his doctoral dissertation entitled "Source code quality modeling on the basis of data gathered in version control systems." Congratulations!
18 September 2019
The MEW-01 Electric Energy Meter, which operates on the basis of Supla software, was awarded the medal "PGE ENERGIA ODNAWIALNA SA" during the 32th International Energy Fair ENERGETAB 2019.
27 August 2019
FAKRO joins the project! It is a great honor and distinction for us that a Polish company with such a high global position decided to join our organization. The result of cooperation will be a gateway that will allow to connect devices working in the Z-Wave network with the SUPLA.ORG infrastructure. As a result, FAKRO customers will be able to control their home furnishings via the SUPLA application. The gateway will allow you to connect Z-Wave equipment such as switches, blinds, awnings, servomotors, dimmers and blinds.
12 August 2019
Over 50.000 people have already installed our application on devices working under the control of the Android system. The application as well as the entire ecosystem are getting more and more popular and we thank you for that very much! The growing popularity and satisfaction of users motivate us even more to make Supla growing faster and faster and to be more and more attractive in terms of functionality and hardware. Thank you once again!
10 May 2019
The application in the v2.3.0 version dedicated to Android has been officially released. The new version supports electricity, gas and water meters. It allows you to analyze graphs of energy consumption and temperatures with humidity. The new release also introduces long-awaited features such as collapsing locations or displaying user icons. V2.3.0 also includes several fixes and improvements.
1 March 2019
We are happy to inform you that SUPLA.ORG gained another technology partner – the HeatPol company. Due to this partnership, Supla will gain new products integrated with our infrastructure. You can examine the first prototype device on March 11 on a fair in Frankfurt – Hall 9.0, Stand D 93. It will be a heater HOME+, integrated with Supla. It will also be supplied to our community, which will allow precise adjustment of the product to expectations of its future users.
12 February 2019
Supla-Cloud software version v2.3, which has been available since mid-December 2018 on production servers, was officially released today to all users. The new version has support for direct links, integrates with Google Home and Amazon Alex voice assistants, allows you to send your own user icons and allows you to easily expand the capabilities of the system by integrating with external applications. The new version also includes several dozen minor upgrades and improvements. Details on GitHub servers.
7 February 2019
The integration with the Google voice assistant is available now. The integration allows for the voice control in terms of switching equipment and light on and off. It also allows for the changes in the intensity of light as well as its color. The option to connect Supla with the assistant is also available using the Google Home application.
17 January 2019
Integration with the Amazon Alexa voice assistant is now available in the skills catalog. Integration with the assistant extends the capabilities of the system with voice control in the range of turning the devices on and off, turning lights on and off, changing the color and brightness of the lighting, and controlling roller shutters based on values expressed in percentages (roller shutter closed percentage).
29 August 2018
Today our app available in the Google Play store exceeded 1,000 reviews with an excellent rating of 4.6 pts on a scale of 1-5. We are grateful to all users for their valuable comments, opinions and reviews. They are very important to us. They help us develop our app in the way and in the direction expected by the entire Supla community.
25 May 2018
The SUPLA-CLOUD v2.2 server software has been released. The new version introduces several dozen new functionalities and improvements. One of them is the channel grouping function which allows e.g. to simultaneously control a group of roller shutters. Another noteworthy change is the adjustment of the user interface for such devices as a smartphone or tablet. A detailed list of changes and project sources are available on the GitHub servers.
23 February 2018
SUPLA-Zamel device is now available in Amazon - the world’s largest on-line store.
6 February 2018
SUPLA-CLOUD Server Software is now available for NAS server solutions by QNAP. Installation and startup of your own server in your home network or company is now based on few clicks. Please go to YouTube for a short presentation.
21 December 2017
SUPLA-CLOUD software has been brought into use as Docker containers. Your own server installation procedure has never been simpler and easier and is now based on few steps only. For more details please go to README.md at https://github.com/SUPLA/supla-docker.
16 November 2017
Zamel has extended their offer by adding four new modules supported by Supla. These include ROW-02 the 2-channel In-Wall module, SRW-01 the roller shutter driver, PNW-01 the Wi-Fi foot-operated switch, and SLW-01 the LED RGB driver. All the products from Zamel-Supla family are now available at supla.zamel.pl.
18 September 2017
New Server Software Version 2.1 is now available. A number of changes and improvements has been implemented. Security has been increased, new user interface has been translated into Italia, French, Spanish and Portuguese, what is more Customer applications can now be managed freely. In Version 2.1, the User can authorize devices in such way that passwords and logins are not necessary during add up. From now on, all you have to do is to enter your email address to add new smartphone or new device.
22 August 2017
Logi has joined the project! Logi is a manufacturer of boilers based on the wood gasification technology being a cheap, ecological and clean heating source. The company has decided to introduce a line of controllers working with SUPLA, so that the Users can remotely control the temperature and boiler’s parameters.
3 August 2017
From August 2017 Supla based module is available in Castorama stores.
28 June 2017
We are pleased to announce that Nice Poland has joined the project. Nice is a leader on the market in the delivery of automated technology for sliding and swing gates, garage doors, as well as window rollers, awnings and roller blinds. Nice combines in their products modern design and high quality, which results in the most reliable automated technology system in the world. Established cooperation resulted in Nice expanding their offer with modules compatible with SUPLA software, and Nice Customers benefitting from the possibilities our project gives.
21 April 2017
SUPLA v2.0 has been released! The software contains a number of new functionalities and improvements. It supports schedule management in a one-off, one-minute, one-hour and one-day cycle and allows to integrate with external IT solutions via RESTful API. The latest version is available either to download from production servers or as sources from the GITHUB server.
09 March 2017
The single channel ROW-01 In-Wall module by Zamel has been made available for sale. This is an In-Wall device to switch electrical devices (e.g. the lighting) on and off. It has one output and two inputs to connect standard switches. For more technical information, please go to manufacturer’s website https://supla.zamel.pl
30 September 2016
ZAMEL with a 27 year history on the market has declared they want to join the project. Therefore, ZAMEL will launch a new line of products, which will be develop together based on project infrastructure. The new products will include one- and two- channel In-Wall modules, roller shutter driver, RGB controller, as well as gate module. All the products will operate within Wi-Fi in 802.11 b/g/n 2.4Ghz standard. The declaration was followed by a delivery of a one channel In-Wall module prototype which we are pleased to be testing. Test results will be published shortly on Facebook and forum.
23 June 2016
SD Card image for Raspberry PI with software SUPLA-CLOUD is now available to download. It includes server software (supla-server + cloud + apache + php5 + mysql) but also software for the actuating device supla-dev.
26 February 2016
We have made the Arduino MEGA library Version 1.0 available. This software enables you to connect Arduino to SUPLA system. The Library supports Ethernet modules based on ENC28J60 and the popular Ethernet Shield based on W5100. Click here to download the Library.
16 January 2016
Along with project start-up, we would like to initiate a community around SUPL A – a group of people who are interested not only in software, electronics, intelligent solutions, enthusiasts and fans… but also people who are entirely technology users interested in handy, easy and functional solutions. We will try to provide materials, tutorials and movies, but at the same time would like to ask for suggestions or questions from your side – in brief, we would like to invite you to join the community and our project:)
16 January 2016
After many months of intensive work, pulling nights and no free weekends, we are happy to start SUPLA – an open building automation system.

All you need to start your adventure with SUPLA, can be found below.

SUPLA-DEV

Software for executive devices built based on Raspberry PI, Arduino or ESP8266 microcomputer.
Download

SUPLA-CLOUD

Server software enabling communication and system management through Internet browser.

Create an account Sign In

Server software sources SUPLA-CLOUD can be downloaded from GITHUB.

Download from GITHUB

SUPLA-CLIENT

Application for smartphones and tablets based on iOS and Android.

Application for iPhone and iPad
Application for Android